Luma Comfort Humidifier HCW10B User Manual download pdf (Page 5)

a. Unscrew the nozzle as indicated in figure 1 and remove the water tank from the base as indicated

in figure 2.

b. Remove the water tank cover as indicated in figure 3 and pour water into the water tank as

indicated in figure 4.

c. Place the water tank cover back onto the tank as indicated in figure 5 and place the entire water

tank back into the unit’s base as indicated in figure 6. You should hear the water flowing through

the tank. If you do not hear water flowing through the tank, remove the water tank and replace it

back onto the base.

d. Screw the nozzle back onto the unit.

Quick Start Instructions

a. After filling the water tank with water, replace the tank back onto the base, screw in the nozzle

and plug the unit into a power supply. The unit will now be on standby mode. Turn the unit on or

off by pressing the power button on the control panel.

b. Once the humidifier is turned on, you can also control the mist volume by pressing the “+” or “-“

buttons on the control panel.

c. If the LED indicator turns red, this means not enough water has flowed through the unit yet. Wait

a few seconds for the water to completely flow through the tank. At this point, the indicator light

on the control panel will turn from red to blue, which indicates that it should be working properly.

d. If there is not enough water in the tank, the empty water tank LED indicator light will also turn red.

Turn off the humidifier, unplug it from the power supply and add more water to the tank by

following the steps listed above.

e. The humidifier has a memory function. If the unit is turned off without unplugging the power

supply, once it is turned on again using the power button, it will revert back to the last mist setting.

All of the settings will reset to the default settings if the unit is unplugged from the power supply.

1 2 3 4 5 6 7 8 9

No comments

Luma Comfort Humidifier HCW10B User Manual Page 5